Overlay 8

5 6 7 8 9 10 11 16 18 19 20 23 24 28 29 30 36 37 38 39 40 41 42 46 47 60 61 62 68 69 87 105 106 107 108

Whether to pseudo-canonicalize ROHF orbitals.
-1               Yes.
0                 Default (Yes if ROHF).
1                 No.

IOp(8/6)

Bucket selection.
0                 Buckets for MP2: (IA/JB).
1                 Buckets for stability: (IA/JB), (IJ/AB).
2                 Buckets for CID or MP3: (IJ/AB), (IA/JB), (IJ/KL).
3                 Buckets for semi-direct MP4DQ, CISD, QCISD, BD: (IJ/AB), (IA/JB), (IK/KL), (IJ/KA).
4                 CISD or MP4SDQ or MP4SDTQ, but includes (IA/BC).
5                 The complete set of transformed integrals.
6                 Full transformation if this is consistent with MaxDisk, otherwise same as 3.
7                 Full transformation if this is consistent with MaxDisk, otherwise same as 4.

IOp(8/7)

SCF convergence test.
0 Test that SCF has converged.
1 Do not test SCF convergence (mainly used for testing).

IOp(8/8)

L811: Whether to delete MO integrals.
0                 Default (No).
1                 Yes.
2                 No.

IOp(8/9)

L802: Debug control.
0 Operate normally.
-N Force N orbitals per pass.

L804: Direct Transformation Control.
0                 Operate normally.
1                 Generate and test RInt3 array (L804).
2                 Accumulate MP2 force constant terms in direct fashion.
3                 Write the MO basis first derivative ERI's to disk.
10               Force fully in-Core algorithm (L804 only).
20               Force transformed integrals in Core algorithm.
30               Force semi-direct transformation.
100            Force output bucket in Core anti-symmetrization.
200            Force sorting for output bucks.
1000           Force semi-direct mode 1.
2000           Force semi-direct mode 2.
3000           Force semi-direct mode 3 if IOp(8/6)=3.
4000           Force semi-direct mode 4 if IOp(8/6)=3.
00000         Default (10000).
10000         Do not symmetry compress transformed integrals.
20000         Do symmetry compress transformed integrals (buckets) (This will cause windowed MOs, reordered in the order of                    representations like occ-rep1,occ-rep2,.... virt-rep1,virt-rep2,... eigenvalues and symmetry assignment vectors will be put                    in correspondence with vectors. VGZ).
30000         Symmetry compress transformed integrals only if RHF. (Upper triangle of symmetry compressed integrals for IOp(8/6)=5                    or 4 only! (VGZ)).
100000       Reorder MOs, eigenvalues and symmetry assignment vectors according to the representations.

IOp(8/10)

Window is selected as follows:
-N               Use the top N occupieds and lowest N virtuals.
0                 Default, same as 4.
N                1 ≤ N ≤ 89 selects frozen-core type N.
1                 The largest noble gas core is frozen.
2                 G2 frozen-core: the largest noble gas core and main group d orbitals are frozen, except that
                   the outer sp electrons of 3rd row and later alkali and alkali earth elements are retained.
3                 The next to the largest noble gas core is frozen.
4                 The largest noble gas core and main group d's are frozen.
5                 G3 frozen-core: the largest noble gas core is frozen, except that the outer sp electrons of 3rd row and later alkali and alkali                    earth elements are retained.
6                 G4 frozen-core: the largest noble gas core is frozen, except that the outer sp electrons of 2nd row and later alkali and                    alkali earth elements are retained. For basis sets with double-zeta cores, core virtuals are also frozen.
90               Use all MOs.
91               The window is specified by IOp(8/37-38). If IOp(8/37) is 0, a card is read in indicating the start and the end. A negative                    value for the end deletes the top virtuals.
92               The window is recovered from RWF 569.
93               The window is recovered from file 569 on the checkpoint file.
94               Read a list of orbitals to freeze.
000            Default (200).
10x            Use orbital energies to choose core orbitals.
20x            Use overlap with atomic core orbitals from Harris to choose core orbitals.
30x            Use overlap with atomic core orbitals from Core Ham to choose core orbitals.

IOp(8/11)

MO coefficient, orbital energy, and number of electrons test.
0                 Default, same as 2 except for during BD iterations or BD=Read.
1                 Just print a warning message.
2                 Kill the job if any MO coefficients are greater than 1000.0 or the smallest difference between occupied and virtual orbital                    energies is less than 0.001. Also, kill a frozen-core job if there is significant core-valence mixing in the canonical orbitals.
00               Default, same as 10.
10               Suppress such a test (CPHF may still be done for such a case).
20               Kill the job if there is no correlation energy; e.g., if there is only 1 electron or 1 virtual spin-orbital.

IOp(8/16)

L811: Maximum number of orbitals per pass (only if integral derivative file is being written). Default is as
many as fit with Max Disk.

IOp(8/18)

L811: Which type of derivative transformation to do.
0                 Default, same as 3.
1                 Non-canonical, Uij,x = -1/2 Sij,x.
2                 Canonical, Uij,x = (Fij,x - EjSij,x) / (Ei-Ej) Note that this blows up for degenerate orbitals and is intended primarily for                    debugging.
3                 Non-canonical, Uij,x = -1/2 Sij,x, except canonical in frozen-active blocks.
4                 Non-canonical, Uij,x = -Sij,x Uji,x = 0.
5                 Canonical occupieds, Uab,x = -Sab,x/2.
6                 Canonical virtuals, Uij,x = -Sij,x/2.

IOp(8/19)

L811: The nature of the perturbation(s).
0 Default (1st order nuclear and electric field).
IJK Nuclear Kth order. Electric field Jth order. Magnetic field Ith order.

IOp(8/20)

L811: Which terms to include.
0                 Default (same as 11).
1                 MO derivative times integral term.
10               MO times integral derivative term.

IOp(8/23)

L811: Algorithm control.
0                 Default (32).
1                 Unused.
2                 Accumulate MP2 force constant terms in direct fashion.
3                 Write the MO basis first derivative ERI's to disk.
20               Force fully direct.
30               Force semi-direct.

IOp(8/24)

Whether to try to transform old amplitudes on the checkpoint file.
0                 Default: 1 if doing BD=Read and amplitudes are present; 2 otherwise.
1                 Yes.
2                 No.
10               Transform Z-amplitudes as well.
20               Do not transform Z-amplitudes as well.
000            Default, transform EOM amplitudes if transforming ground-state ones.
100            Transform EOM amplitudes.
200            Do not transform EOM amplitudes.

IOp(8/28)

L921, L922: Hack number of occupieds for full CI.
-1                Transform all orbitals (after freezing core) as occupieds (i.e., set NOA=NOB=NROrb in transformation).
0                 No.
N                Transform N orbitals (after frozen core) as occupieds (i.e., set NOA=NOB=N for purposes of transformation).

IOp(8/29)

L118: Requested disk usage. This will determine the number of times AO integrals and derivatives are evaluated unless overridden by IOp(8/31). This only applies if the integral derivatives are not stored.
-3               Use as much as desired, independent of MAXDISK.
-2               Use an amount which is similar to the maximum disk usage in other parts of the MP2 freq. code.
-1               Use as much as needed for maximum efficiency, subject to the limit imposed by MAXDISK.
0                 Default (-1).
N                N evaluations and hence N coarse tiled batches (1...6 are the currently implemented options).

IOp(8/30)

Type of window.
0                 Default. Set up /Orb/ as indicated by IOp(8/10).
1                 Test window. Set up for full but zero core MOs.
-1                Set up /Orb/ for a full window but then blank the wavefunction coefficients in L804.

IOp(8/36)

Whether to update force constants with the MP2 product of MP2 integral derivatives term (only applies if integral derivative file is not written).
0                 Default (Yes).
1                 Yes.
2                 No.
00               Default on whether to make Poo and Pvv for MP2. (Yes if Ix is not stored, no otherwise).
10               Yes.
20               No.

IOp(8/37)

Integer specifying first window parameter (n).

IOp(8/38)

Integer specifying second window parameter (m).

IOp(8/39)

Localized orbital method adopted in SAC/SAC-CI.
0                 Default. No localization.
1                 Boys method.
2                 Population method.
3                 Boys + population method.

IOp(8/40)

Handling of ROHF window.
0                 Default (2).
1                 Use ROMP2 approach, forming pseudo-canonical alpha and beta orbitals and doing UHF transformation.
2                 Treat as RHF, transforming only alpha orbitals.

IOp(8/41)

Transformation of spin-orbitals (alpha only) within occupied and unoccupied orbital subspaces by minimum orbital-deformation (MOD) method.
0                 Default. No.
1                 No, but save MOs.
2                 Yes. Take reference MOs from disk if available.
3                 No for the 1st geometry of opt, yes otherwise.

IOp(8/42)

Whether to reorder MOs during potential surface exploration.
0                 No.
1                 Yes.
2                 Yes (for SAC-CI single point calculation).
00               Use orbital energies in ordering.
10               Don't use orbital energies in ordering.
000            Use second moments in ordering.
100            Don't use second moments in ordering.
0000           Use dipole moments in ordering.
1000           Don't use dipole moments in ordering.

IOp(8/46)

Indicates special case of non-HF calculation.
0 Default - MOs are canonical HF orbitals.
1 Input orbitals are not canonical HF and pseudo-canonical orbitals must be generated here for the post-SCF.

IOp(8/47)

Whether L804/L811 should generate results compressed over active atoms.
0                 Default (2).
1                 Active atoms.
2                 Full list.
3                 Full list, but blank contributions from inactive atoms (no difference from 2 for overlay 8).
4                 Active atoms, and store Hessian contributions over active atoms only.

IOp(8/60)

Override standard values of IRadAn.

IOp(8/61)

Override standard values of IRanWt.

IOp(8/62)

Override standard values of IRanGd.

IOp(8/68)

EOM-CCSD
0                 no EOM.
1                 Do EOM with the default algorithm (right and left spaces separately).
11               Do EOM doing only the transition energy (right space).
21               Do EOM doing right and left eigenvectors using the same expansion space for both.
31               Do EOM doing right and left eigenvectors using biorthogonal expansion spaces.

IOp(8/69)

EOM: Number of states per irreducible representation (largest Abelian subgroup) to do.
0                 Default (2).
N                N per irreducible representation.
-1                Read the number for each irreducible representation, all from one line.
The order of irreducible representations is the same as printed for symmetry-adapted basis functions by L301.

IOp(8/87)

Accuracy of integrals.
0 Default (N=10).
N 10^-N.

IOp(8/105)

Convergence of amplitudes for EOM iterations.
0 Default (1.d-5).
N 10^-(N-2).

IOp(8/106)

Number of EOM states for LR transition densities.
0                 Default (None).
-1                All.
N                First N of each symmetry.

IOp(8/107)

EOM state of most interest.
0 Default (1st excited state).
N Nth excited state.

IOp(8/108)

EOM-CCSD: Total number of states to do. Guesses are taken from the checkpoint file if RdAmp was specified, with remaining states taken from the CIS guess in CIS energy order.
0 Default (2*NIrrep)

Last update: 4 November 2011